This was another apron that I have wanted to do for years and knew it was time to make it so I could enter it into the fair. I saw a similar apron at Pier-1 years ago and thought it was cute, but it I knew I could make it cuter! I decided since my favorite holiday is just around the corner that it was time to pull the fabric out of the project bin to complete. The bodice was created the same way as the Fourth of July Apron, but instead of a sweetheart neck I wanted more square. After pinning and sewing the orange ribbon in place between the bodice pieces I sewed on the web fabric belt and started working on the skirt. The skirt layers were created with a ½ a yard of each print being cut into ½ a circle. Next I used a triangle I cut out of a piece of paper to cut out the fabric. I didn’t want the triangles to directly lay on each other so it took a little maneuvering, but finally got it perfect. To be completely honest the skirt was that hardest part of this apron. It took a long time to sew all of triangles for each layer. Once all of the skirt layers were sewn, I pinned them to the belt, layering each section over another and sewed in place. The last step was to sew on the ribbon for the neck and ties. The apron was a long time in the making the finished project didn’t disappoint; it even got Honorable Mention at the fair. I can’t wait to wear it for Halloween!
I created this blog to share my creations with hopes that it will inspire others to show their creative side.